diff options
Diffstat (limited to 'SamsungPlatformPkgOrigen/SmdkBoardPkg/SmdkBoardPkg-Exynos.fdf')
| -rw-r--r-- | SamsungPlatformPkgOrigen/SmdkBoardPkg/SmdkBoardPkg-Exynos.fdf | 316 |
1 files changed, 0 insertions, 316 deletions
diff --git a/SamsungPlatformPkgOrigen/SmdkBoardPkg/SmdkBoardPkg-Exynos.fdf b/SamsungPlatformPkgOrigen/SmdkBoardPkg/SmdkBoardPkg-Exynos.fdf deleted file mode 100644 index 72574416a..000000000 --- a/SamsungPlatformPkgOrigen/SmdkBoardPkg/SmdkBoardPkg-Exynos.fdf +++ /dev/null @@ -1,316 +0,0 @@ -# FLASH layout file for ARM VE. -# -# Copyright (c) 2011, Samsung Electronics Co. All rights reserved. -# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# - -################################################################################ -# -# FD Section -# The [FD] Section is made up of the definition statements and a -# description of what goes into the Flash Device Image. Each FD section -# defines one flash "device" image. A flash device image may be one of -# the following: Removable media bootable image (like a boot floppy -# image,) an Option ROM image (that would be "flashed" into an add-in -# card,) a System "Flash" image (that would be burned into a system's -# flash) or an Update ("Capsule") image that will be used to update and -# existing system flash. -# -################################################################################ - - -[FD.SmdkBoard_EFI] -BaseAddress = 0x43E00000|gArmTokenSpaceGuid.PcdFdBaseAddress -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize -ErasePolarity = 1 -BlockSize = 0x00010000 -NumBlocks = 0x20 - -################################################################################ -# -# Following are lists of FD Region layout which correspond to the locations of different -# images within the flash device. -# -# Regions must be defined in ascending order and may not overlap. -# -# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by -# the pipe "|" character, followed by the size of the region, also in hex with the leading -# "0x" characters. Like: -# Offset|Size -# PcdOffsetCName|PcdSizeCName -# RegionType <FV, DATA, or FILE> -# -################################################################################ - -0x00000000|0x00100000 -gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize -FV = FVMAIN_COMPACT - -0x00110000|0x00010000 -gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize -#NV_VARIABLE_STORE -DATA = { - ## This is the EFI_FIRMWARE_VOLUME_HEADER - # ZeroVector [] - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - # FileSystemGuid: gEfiSystemNvDataFvGuid = - # { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }} - 0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C, - 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50, - # FvLength: 0x20000 - 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, - #Signature "_FVH" #Attributes - 0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00, - #HeaderLength #CheckSum #ExtHeaderOffset #Reserved #Revision - 0x48, 0x00, 0x36, 0x09, 0x00, 0x00, 0x00, 0x02, - #Blockmap[0]: 2 Blocks * 0x10000 Bytes / Block - 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, - #Blockmap[1]: End - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - ## This is the VARIABLE_STORE_HEADER - #Signature: gEfiVariableGuid = - # { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }} - 0x16, 0x36, 0xcf, 0xdd, 0x75, 0x32, 0x64, 0x41, - 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d, - #Size: 0x10000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) - 0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0xFFB8 - # This can speed up the Variable Dispatch a bit. - 0xB8, 0xFF, 0x00, 0x00, - #FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32 - 0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 -} - -################################################################################ -# -# FV Section -# -# [FV] section is used to define what components or modules are placed within a flash -# device file. This section also defines order the components and modules are positioned -# within the image. The [FV] section consists of define statements, set statements and -# module statements. -# -################################################################################ - -[FV.FVMAIN] -BlockSize = 0x40 -NumBlocks = 0 # This FV gets compressed so make it just big enough -FvAlignment = 8 # FV alignment and FV attributes setting. -ERASE_POLARITY = 1 -MEMORY_MAPPED = TRUE -STICKY_WRITE = TRUE -LOCK_CAP = TRUE -LOCK_STATUS = TRUE -WRITE_DISABLED_CAP = TRUE -WRITE_ENABLED_CAP = TRUE -WRITE_STATUS = TRUE -WRITE_LOCK_CAP = TRUE -WRITE_LOCK_STATUS = TRUE -READ_DISABLED_CAP = TRUE -READ_ENABLED_CAP = TRUE -READ_STATUS = TRUE -READ_LOCK_CAP = TRUE -READ_LOCK_STATUS = TRUE - - INF MdeModulePkg/Core/Dxe/DxeMain.inf - - # - # PI DXE Drivers producing Architectural Protocols (EFI Services) - # - INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf - INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf - INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf - INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf - INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf - INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf - - INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf - INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf - INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf - INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf - INF EmbeddedPkg/SerialDxe/SerialDxe.inf - - - INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf - INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf - INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf - INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf - - INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf - INF SamsungPlatformPkgOrigen/ExynosPkg/TimerDxe/TimerDxe.inf - - # - # ACPI Support - # - - # - # Samsung specific Driver - # - INF SamsungPlatformPkgOrigen/ExynosPkg/SDHCDxe/SDHCDxe.inf - INF SamsungPlatformPkgOrigen/ExynosPkg/Gpio/Gpio.inf - # - # PCI EMULATION - # - # - # Semi-hosting filesystem - # - INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf - - # - # FAT filesystem + GPT/MBR partitioning - # - INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf - INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf - INF FatBinPkg/EnhancedFatDxe/Fat.inf - INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf - - # - # USB HOST STACK - # - INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf - - # - # UEFI application (Shell Embedded Boot Loader) - # - INF EmbeddedPkg/Ebl/Ebl.inf - - - # - # Bds - # - INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf - INF ArmPlatformPkg/Bds/Bds.inf - -[FV.FVMAIN_COMPACT] -FvAlignment = 8 -ERASE_POLARITY = 1 -MEMORY_MAPPED = TRUE -STICKY_WRITE = TRUE -LOCK_CAP = TRUE -LOCK_STATUS = TRUE -WRITE_DISABLED_CAP = TRUE -WRITE_ENABLED_CAP = TRUE -WRITE_STATUS = TRUE -WRITE_LOCK_CAP = TRUE -WRITE_LOCK_STATUS = TRUE -READ_DISABLED_CAP = TRUE -READ_ENABLED_CAP = TRUE -READ_STATUS = TRUE -READ_LOCK_CAP = TRUE -READ_LOCK_STATUS = TRUE - - INF ArmPlatformPkg/PrePi/PeiMPCore.inf - FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 { - SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { - SECTION FV_IMAGE = FVMAIN - } - } - - -################################################################################ -# -# Rules are use with the [FV] section's module INF type to define -# how an FFS file is created for a given INF file. The following Rule are the default -# rules for the different module type. User can add the customized rules to define the -# content of the FFS file. -# -################################################################################ - - -############################################################################ -# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section # -############################################################################ -# -#[Rule.Common.DXE_DRIVER] -# FILE DRIVER = $(NAMED_GUID) { -# DXE_DEPEX DXE_DEPEX Optional |.depex -# COMPRESS PI_STD { -# GUIDED { -# PE32 PE32 |.efi -# UI STRING="$(MODULE_NAME)" Optional -# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) -# } -# } -# } -# -############################################################################ - -[Rule.Common.SEC] - FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED { - TE TE Align = 32 |.efi - } - -[Rule.Common.PEI_CORE] - FILE PEI_CORE = $(NAMED_GUID) { - TE TE |.efi - UI STRING ="$(MODULE_NAME)" Optional - } - -[Rule.Common.PEIM] - FILE PEIM = $(NAMED_GUID) { - PEI_DEPEX PEI_DEPEX Optional |.depex - TE TE |.efi - UI STRING="$(MODULE_NAME)" Optional - } - -[Rule.Common.PEIM.TIANOCOMPRESSED] - FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 { - PEI_DEPEX PEI_DEPEX Optional |.depex - GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE { - PE32 PE32 |.efi - UI STRING="$(MODULE_NAME)" Optional - } - } - -[Rule.Common.DXE_CORE] - FILE DXE_CORE = $(NAMED_GUID) { - PE32 PE32 |.efi - UI STRING="$(MODULE_NAME)" Optional - } - -[Rule.Common.UEFI_DRIVER] - FILE DRIVER = $(NAMED_GUID) { - DXE_DEPEX DXE_DEPEX Optional |.depex - PE32 PE32 |.efi - UI STRING="$(MODULE_NAME)" Optional - } - -[Rule.Common.DXE_DRIVER] - FILE DRIVER = $(NAMED_GUID) { - DXE_DEPEX DXE_DEPEX Optional |.depex - PE32 PE32 |.efi - UI STRING="$(MODULE_NAME)" Optional - } - -[Rule.Common.DXE_RUNTIME_DRIVER] - FILE DRIVER = $(NAMED_GUID) { - DXE_DEPEX DXE_DEPEX Optional |.depex - PE32 PE32 |.efi - UI STRING="$(MODULE_NAME)" Optional - } - -[Rule.Common.USER_DEFINED.ACPITABLE] - FILE FREEFORM = $(NAMED_GUID) { - RAW ACPI |.acpi - RAW ASL |.aml - UI STRING="$(MODULE_NAME)" Optional - } - -[Rule.Common.UEFI_APPLICATION] - FILE APPLICATION = $(NAMED_GUID) { - PE32 PE32 |.efi - UI STRING ="$(MODULE_NAME)" Optional - } - -[Rule.Common.UEFI_APPLICATION.BINARY] - FILE APPLICATION = $(NAMED_GUID) { - PE32 PE32 |.efi - UI STRING="$(MODULE_NAME)" Optional - VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) - } |