blob: a4973c26028b765f4cc69159a11b6539e7cd43d5 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
|
=== ArndaleBoard OVERVIEW ===
The project aims to support UEFI for Exynos 5250 Soc using the edk2
code base.
=== STATUS ===
Current capabilities:
* Uefi Boot from microSD card
=== FUTURE PLANS ===
* Support for PXE, SATA, ACPI, USB
- KeyBoard, Mouse and MassStorage
=== BUILDING ARNDALE Board ===
Pre-requisites:
* Build environment capable of build the edk2 MdeModulePkg.
* A properly configured ASL compiler:
- Intel ASL compiler: Available from http://www.acpica.org
- Microsoft ASL compiler: Available from http://www.acpi.info
Getting bl1:
Download the bl1 from https://wiki.linaro.org/Boards/Arndale/Setup/EnterpriseUbuntuServer?action=AttachFile&do=view&target=arndale-bl1.img
Build the ArndaleBoardPkg by running from the Workspace
build -p SamsungPlatformPkg/ArndaleBoardPkg/arndale-Exynos5250.dsc -a ARM -t ARMGCC -b RELEASE -D EXYNOS5250_EVT1 -D DDR3 for release version
Following the edk2 build process, you will find the Arndale binaries
under the $WORKSPACE/Build/*/*/FV directory. You can find the below
mentioned binary image.
* ARNDALE_EFI.FD
=== RUNNING ArndaleBoardPkg on the Arndale board ===
* need to be in Linux Environment to do the below procedure
* Insert the microSD card.
* copy the arndale-bl1.img to the SD/MMC card by using the comand
sudo dd if=arndale-bl1.img of=/dev/sdX bs=512 seek=1
* Copy the Uefi Image to SD/MMC with below command from the Workspace.
sudo dd if=Build/ArndaleBoard-Exynos/RELEASE_ARMGCC/FV/ARNDALE_EFI.fd of=/dev/sdX bs=512 seek=49
* Now the booting device is ready to be used.
* Insert the SDMMC card in the Arndale board reader slot MMC Ch2.
* Connect the Uart cable from the Arndale device to the PC terminal.
* Power ON the Device.
* The boot message should be visible on the termial.
* Finally, it should give boot options.
|
