summaryrefslogtreecommitdiff
path: root/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5sSec.c
blob: d9d3ff731f6702200a4db93811007f1c4b1cc0cb (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
/** @file
*
*  Copyright (c) 2011, ARM Limited. All rights reserved.
*  
*  This program and the accompanying materials                          
*  are licensed and made available under the terms and conditions of the BSD License         
*  which accompanies this distribution.  The full text of the license may be found at        
*  http://opensource.org/licenses/bsd-license.php                                            
*
*  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     
*  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             
*
**/

#include <Library/IoLib.h>
#include <Library/ArmPlatformLib.h>
#include <Library/DebugLib.h>
#include <Library/PcdLib.h>
#include <Drivers/PL310L2Cache.h>
#include <Drivers/SP804Timer.h>
#include <ArmPlatform.h>

/**
  Initialize the Secure peripherals and memory regions

  If Trustzone is supported by your platform then this function makes the required initialization
  of the secure peripherals and memory regions.

**/
VOID
ArmPlatformTrustzoneInit (
  VOID
  )
{
  // No TZPC or TZASC on RTSM to initialize
}

/**
  Initialize controllers that must setup at the early stage

  Some peripherals must be initialized in Secure World.
  For example, some L2x0 requires to be initialized in Secure World

**/
VOID
ArmPlatformSecInitialize (
  VOID
  )
{
  // Configure periodic timer (TIMER0) for 1MHz operation
  MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER0_TIMCLK);
  // Configure 1MHz clock
  MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER1_TIMCLK);
  // Configure SP810 to use 1MHz clock and disable
  MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER2_EN, SP810_SYS_CTRL_TIMER2_TIMCLK);
  // Configure SP810 to use 1MHz clock and disable
  MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER3_EN, SP810_SYS_CTRL_TIMER3_TIMCLK);
}

/**
  Call before jumping to Normal World

  This function allows the firmware platform to do extra actions before
  jumping to the Normal World

**/
VOID
ArmPlatformSecExtraAction (
  IN  UINTN         MpId,
  OUT UINTN*        JumpAddress
  )
{
  *JumpAddress = PcdGet32(PcdFvBaseAddress);
}