From 9f6b977f6619950438ac3b765904b7a3ff454baa Mon Sep 17 00:00:00 2001 From: andrewfish Date: Tue, 11 May 2010 00:06:47 +0000 Subject: Add PCD setting for Timer, default is 10 times a second. You need the timer to detect a media change event. Also coded up DMA, but have not debugged it yet and it is not turned on. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10478 6f19259b-4bc3-4df7-8a09-765794883524 --- Omap35xxPkg/MMCHSDxe/MMCHS.c | 108 ++++++++++++++++++++++------------------- Omap35xxPkg/MMCHSDxe/MMCHS.inf | 1 + 2 files changed, 59 insertions(+), 50 deletions(-) (limited to 'Omap35xxPkg/MMCHSDxe') diff --git a/Omap35xxPkg/MMCHSDxe/MMCHS.c b/Omap35xxPkg/MMCHSDxe/MMCHS.c index 3238d6182..54e24d982 100644 --- a/Omap35xxPkg/MMCHSDxe/MMCHS.c +++ b/Omap35xxPkg/MMCHSDxe/MMCHS.c @@ -740,7 +740,7 @@ DmaBlocks ( ) { EFI_STATUS Status; - UINTN RetryCount = 0; + UINTN DmaSize = 0; UINTN Cmd = 0; UINTN CmdInterruptEnable; UINTN CmdArgument; @@ -749,66 +749,73 @@ DmaBlocks ( OMAP_DMA4 Dma4; DMA_MAP_OPERATION DmaOperation; +CpuDeadLoop (); + // Map passed in buffer for DMA xfer + DmaSize = BlockCount * This->Media->BlockSize; + Status = DmaMap (DmaOperation, Buffer, &DmaSize, &BufferAddress, &BufferMap); + if (EFI_ERROR (Status)) { + return Status; + } + + ZeroMem (&DmaOperation, sizeof (DMA_MAP_OPERATION)); + + Dma4.DataType = 2; // DMA4_CSDPi[1:0] 32-bit elements from MMCHS_DATA + Dma4.SourceEndiansim = 0; // DMA4_CSDPi[21] + Dma4.DestinationEndianism = 0; // DMA4_CSDPi[19] + Dma4.SourcePacked = 0; // DMA4_CSDPi[6] + Dma4.DestinationPacked = 0; // DMA4_CSDPi[13] + Dma4.NumberOfElementPerFrame = This->Media->BlockSize/4; // DMA4_CENi (TRM 4K is optimum value) + Dma4.NumberOfFramePerTransferBlock = BlockCount; // DMA4_CFNi + Dma4.ReadPriority = 0; // DMA4_CCRi[6] Low priority read + Dma4.WritePriority = 0; // DMA4_CCRi[23] Prefetech disabled //Populate the command information based on the operation type. if (OperationType == READ) { Cmd = CMD18; //Multiple block read CmdInterruptEnable = CMD18_INT_EN; DmaOperation = MapOperationBusMasterCommonBuffer; + + Dma4.ReadPortAccessType =0 ; // DMA4_CSDPi[8:7] Can not burst MMCHS_DATA reg + Dma4.WritePortAccessType = 3; // DMA4_CSDPi[15:14] Memory burst 16x32 + Dma4.WriteMode = 1; // DMA4_CSDPi[17:16] Write posted + + Dma4.SourceStartAddress = MMCHS_DATA; // DMA4_CSSAi + Dma4.DestinationStartAddress = (UINT32)BufferAddress; // DMA4_CDSAi + Dma4.SourceElementIndex = 1; // DMA4_CSEi + Dma4.SourceFrameIndex = 0x200; // DMA4_CSFi + Dma4.DestinationElementIndex = 1; // DMA4_CDEi + Dma4.DestinationFrameIndex = 0; // DMA4_CDFi + + Dma4.ReadPortAccessMode = 0; // DMA4_CCRi[13:12] Always read MMCHS_DATA + Dma4.WritePortAccessMode = 1; // DMA4_CCRi[15:14] Post increment memory address + Dma4.ReadRequestNumber = 0x1e; // DMA4_CCRi[4:0] Syncro with MMCA_DMA_RX (61) + Dma4.WriteRequestNumber = 1; // DMA4_CCRi[20:19] Syncro upper 0x3e == 62 (one based) + } else if (OperationType == WRITE) { Cmd = CMD25; //Multiple block write CmdInterruptEnable = CMD25_INT_EN; DmaOperation = MapOperationBusMasterRead; - } else { - return EFI_INVALID_PARAMETER; - } - // Map passed in buffer for DMA xfer - RetryCount = BlockCount * This->Media->BlockSize; - Status = DmaMap (DmaOperation, Buffer, &RetryCount, &BufferAddress, &BufferMap); - if (EFI_ERROR (Status)) { - return Status; - } + Dma4.ReadPortAccessType = 3; // DMA4_CSDPi[8:7] Memory burst 16x32 + Dma4.WritePortAccessType = 0; // DMA4_CSDPi[15:14] Can not burst MMCHS_DATA reg + Dma4.WriteMode = 1; // DMA4_CSDPi[17:16] Write posted ??? + + Dma4.SourceStartAddress = (UINT32)BufferAddress; // DMA4_CSSAi + Dma4.DestinationStartAddress = MMCHS_DATA; // DMA4_CDSAi + Dma4.SourceElementIndex = 1; // DMA4_CSEi + Dma4.SourceFrameIndex = 0x200; // DMA4_CSFi + Dma4.DestinationElementIndex = 1; // DMA4_CDEi + Dma4.DestinationFrameIndex = 0; // DMA4_CDFi + + Dma4.ReadPortAccessMode = 1; // DMA4_CCRi[13:12] Post increment memory address + Dma4.WritePortAccessMode = 0; // DMA4_CCRi[15:14] Always write MMCHS_DATA + Dma4.ReadRequestNumber = 0x1d; // DMA4_CCRi[4:0] Syncro with MMCA_DMA_TX (60) + Dma4.WriteRequestNumber = 1; // DMA4_CCRi[20:19] Syncro upper 0x3d == 61 (one based) - #if 0 - MmioWrite32 (DMA4_CSDP(0), DMA4_CSDP_DATA_TYPE32 | DMA4_CSDP_SRC_BURST_EN64 | DMA4_CSDP_WRITE_MODE_POSTED); - MmioWrite32 (DMA4_CEN(0), 0x4096); // Channel Element number - MmioWrite32 (DMA4_CFN(0), 0x1); // Channel Frame number - if () { - MmioWrite32 (DMA4_CCR(0), X | DMA4_CCR_FS_PACKET | DMA4_CCR_RD_ACTIVE | DMA4_CCR_WR_ACTIVE | DMA4_CCR_DST_AMODE_POST_INC | DMA4_CCR_SEL_SRC_DEST_SYNC_SOURCE); - MmioWrite32 (DMA4_CSSA(0), MMCHS_DATA); // Src is SD Card - MmioWrite32 (DMA4_CDSA(0), (UINT32)BufferAddress); // Dst memory } else { - MmioWrite32 (DMA4_CCR(0), X | DMA4_CCR_FS_PACKET | DMA4_CCR_RD_ACTIVE | DMA4_CCR_WR_ACTIVE | DMA4_CCR_SRC_AMODE_POST_INC); - MmioWrite32 (DMA4_CSSA(0), (UINT32)BufferAddress); // Src memory - MmioWrite32 (DMA4_CDSA(0), MMCHS_DATA); // Dst SD Card + return EFI_INVALID_PARAMETER; } - MmioWrite32 (DMA4_CSE(0), 1); - MmioWrite32 (DMA4_CSF(0), This->Media->BlockSize); - MmioWrite32 (DMA4_CDE(0), 1); -#endif - Dma4.DataType = 0; // DMA4_CSDPi[1:0] - Dma4.ReadPortAccessType =0; // DMA4_CSDPi[8:7] - Dma4.WritePortAccessType =0; // DMA4_CSDPi[15:14] - Dma4.SourceEndiansim = 0; // DMA4_CSDPi[21] - Dma4.DestinationEndianism = 0; // DMA4_CSDPi[19] - Dma4.WriteMode = 0; // DMA4_CSDPi[17:16] - Dma4.SourcePacked = 0; // DMA4_CSDPi[6] - Dma4.DestinationPacked = 0; // DMA4_CSDPi[13] - Dma4.NumberOfElementPerFrame = 0; // DMA4_CENi - Dma4.NumberOfFramePerTransferBlock = 0; // DMA4_CFNi - Dma4.SourceStartAddress = 0; // DMA4_CSSAi - Dma4.DestinationStartAddress = 0; // DMA4_CDSAi - Dma4.SourceElementIndex = 0; // DMA4_CSEi - Dma4.SourceFrameIndex = 0; // DMA4_CSFi - Dma4.DestinationElementIndex = 0; // DMA4_CDEi - Dma4.DestinationFrameIndex = 0; // DMA4_CDFi - Dma4.ReadPortAccessMode = 0; // DMA4_CCRi[13:12] - Dma4.WritePortAccessMode = 0; // DMA4_CCRi[15:14] - Dma4.ReadPriority = 0; // DMA4_CCRi[6] - Dma4.WritePriority = 0; // DMA4_CCRi[23] - Dma4.ReadRequestNumber = 0; // DMA4_CCRi[4:0] - Dma4.WriteRequestNumber = 0; // DMA4_CCRi[20:19] + EnableDmaChannel (2, &Dma4); @@ -827,7 +834,7 @@ DmaBlocks ( return Status; } - DisableDmaChannel (2); + DisableDmaChannel (2, DMA4_CSR_BLOCK, DMA4_CSR_ERR); Status = DmaUnmap (BufferMap); return Status; @@ -1029,6 +1036,7 @@ DetectCard ( return Status; } +#define MAX_MMCHS_TRANSFER_SIZE 0x4000 EFI_STATUS SdReadWrite ( @@ -1042,7 +1050,7 @@ SdReadWrite ( EFI_STATUS Status = EFI_SUCCESS; UINTN RetryCount = 0; UINTN BlockCount; - UINTN BytesToBeTranferedThisPass; + UINTN BytesToBeTranferedThisPass = 0; UINTN BytesRemainingToBeTransfered; EFI_TPL OldTpl; BOOLEAN Update; @@ -1323,7 +1331,7 @@ MMCHSInitialize ( Status = gBS->CreateEvent (EVT_TIMER | EVT_NOTIFY_SIGNAL, TPL_CALLBACK, TimerCallback, NULL, &gTimerEvent); ASSERT_EFI_ERROR (Status); - Status = gBS->SetTimer (gTimerEvent, TimerPeriodic, 1000000ULL); // make me a PCD + Status = gBS->SetTimer (gTimerEvent, TimerPeriodic, FixedPcdGet32 (PcdMmchsTimerFreq100NanoSeconds)); ASSERT_EFI_ERROR (Status); //Publish BlockIO. diff --git a/Omap35xxPkg/MMCHSDxe/MMCHS.inf b/Omap35xxPkg/MMCHSDxe/MMCHS.inf index 43327777b..3313ddd44 100644 --- a/Omap35xxPkg/MMCHSDxe/MMCHS.inf +++ b/Omap35xxPkg/MMCHSDxe/MMCHS.inf @@ -47,6 +47,7 @@ [Pcd] gOmap35xxTokenSpaceGuid.PcdOmap35xxMMCHS1Base + gOmap35xxTokenSpaceGuid.PcdMmchsTimerFreq100NanoSeconds [depex] gEmbeddedExternalDeviceProtocolGuid -- cgit v1.2.3