diff options
Diffstat (limited to 'Omap35xxPkg/MMCHSDxe/MMCHS.c')
| -rw-r--r-- | Omap35xxPkg/MMCHSDxe/MMCHS.c | 26 |
1 files changed, 13 insertions, 13 deletions
diff --git a/Omap35xxPkg/MMCHSDxe/MMCHS.c b/Omap35xxPkg/MMCHSDxe/MMCHS.c index 763e1e998..d9739f522 100644 --- a/Omap35xxPkg/MMCHSDxe/MMCHS.c +++ b/Omap35xxPkg/MMCHSDxe/MMCHS.c @@ -113,22 +113,22 @@ SendCmd ( while ((MmioRead32(MMCHS_PSTATE) & DATI_MASK) == DATI_NOT_ALLOWED); //Provide the block size. - MmioWrite32(MMCHS_BLK, BLEN_512BYTES); + MmioWrite32 (MMCHS_BLK, BLEN_512BYTES); //Setting Data timeout counter value to max value. MmioAndThenOr32(MMCHS_SYSCTL, ~DTO_MASK, DTO_VAL); //Clear Status register. - MmioWrite32(MMCHS_STAT, 0xFFFFFFFF); + MmioWrite32 (MMCHS_STAT, 0xFFFFFFFF); //Set command argument register - MmioWrite32(MMCHS_ARG, CmdArgument); + MmioWrite32 (MMCHS_ARG, CmdArgument); //Enable interrupt enable events to occur - MmioWrite32(MMCHS_IE, CmdInterruptEnableVal); + MmioWrite32 (MMCHS_IE, CmdInterruptEnableVal); //Send a command - MmioWrite32(MMCHS_CMD, Cmd); + MmioWrite32 (MMCHS_CMD, Cmd); //Check for the command status. while (RetryCount < MAX_RETRY_COUNT) { @@ -149,7 +149,7 @@ SendCmd ( //Check if command is completed. if ((MmcStatus & CC) == CC) { - MmioWrite32(MMCHS_STAT, CC); + MmioWrite32 (MMCHS_STAT, CC); break; } @@ -354,12 +354,12 @@ InitializeMMCHS ( MmioOr32(CONTROL_PBIAS_LITE, (PBIASLITEVMODE0 | PBIASLITEPWRDNZ0 | PBIASSPEEDCTRL0 | PBIASLITEVMODE1 | PBIASLITEWRDNZ1)); //Software reset of the MMCHS host controller. - MmioWrite32(MMCHS_SYSCONFIG, SOFTRESET); + MmioWrite32 (MMCHS_SYSCONFIG, SOFTRESET); gBS->Stall(1000); while ((MmioRead32(MMCHS_SYSSTATUS) & RESETDONE_MASK) != RESETDONE); //Soft reset for all. - MmioWrite32(MMCHS_SYSCTL, SRA); + MmioWrite32 (MMCHS_SYSCTL, SRA); gBS->Stall(1000); while ((MmioRead32(MMCHS_SYSCTL) & SRA) != 0x0); @@ -373,7 +373,7 @@ InitializeMMCHS ( //MMCHS Controller default initialization MmioOr32(MMCHS_CON, (OD | DW8_1_4_BIT | CEATA_OFF)); - MmioWrite32(MMCHS_HCTL, (SDVS_3_0_V | DTW_1_BIT | SDBP_OFF)); + MmioWrite32 (MMCHS_HCTL, (SDVS_3_0_V | DTW_1_BIT | SDBP_OFF)); //Enable internal clock MmioOr32(MMCHS_SYSCTL, ICE); @@ -403,12 +403,12 @@ PerformCardIdenfication ( BOOLEAN SDCmd8Supported = FALSE; //Enable interrupts. - MmioWrite32(MMCHS_IE, (BADA_EN | CERR_EN | DEB_EN | DCRC_EN | DTO_EN | CIE_EN | + MmioWrite32 (MMCHS_IE, (BADA_EN | CERR_EN | DEB_EN | DCRC_EN | DTO_EN | CIE_EN | CEB_EN | CCRC_EN | CTO_EN | BRR_EN | BWR_EN | TC_EN | CC_EN)); //Controller INIT procedure start. MmioOr32(MMCHS_CON, INIT); - MmioWrite32(MMCHS_CMD, 0x00000000); + MmioWrite32 (MMCHS_CMD, 0x00000000); while (!(MmioRead32(MMCHS_STAT) & CC)); //Wait for 1 ms @@ -418,7 +418,7 @@ PerformCardIdenfication ( MmioOr32(MMCHS_STAT, CC); //Retry INIT procedure. - MmioWrite32(MMCHS_CMD, 0x00000000); + MmioWrite32 (MMCHS_CMD, 0x00000000); while (!(MmioRead32(MMCHS_STAT) & CC)); //End initialization sequence @@ -713,7 +713,7 @@ WriteBlockData( //Write block worth of data. for (Count = 0; Count < DataSize; Count++) { - MmioWrite32(MMCHS_DATA, *DataBuffer++); + MmioWrite32 (MMCHS_DATA, *DataBuffer++); } break; |