1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
|
Linaro provides two methods for installing Linaro binary builds:
# Using a pre-built image, which you can download
# Assembling your own image using provided components
h2. Pre-Installation Steps
Before any installation begins, it is important that you ensure your Versatile Express board has the latest firmware and boot loader installed. Please check the "Firmware Update" tab on this page for the latest updates and installation instructions.
h2. Using pre-built image
h3. Prerequisites
* Ubuntu 12.04 64 bit or newer on your desktop PC, which you can download from "www.ubuntu.com":http://www.ubuntu.com
* 4GB SD card or larger
* Latest firmware installed onto the Versatile Express. Please see "Firmware Update" tab
* This release pre-built image (vexpress.img.bz2), which you can downloaded from the above list of artifacts or just click "here":http://releases.linaro.org/12.10/android/vexpress/vexpress.img.bz2
h3. Installation Steps
* Unzip the downloaded pre-built image
* Insert SD card into your PC and note the assigned @'/dev/sdX'@
bc. dmesg
SDCARD=/dev/sdX # sdcard found from dmesg above
zcat vexpress.img.bz2 | sudo dd bs=64k of=$SDCARD
When the image is created, skip down to the section "Booting the image".
*Note:* Windows users may use the "Image Writer for Windows":https://launchpad.net/win32-image-writer/+download
<hr>
h2. Building a custom image using pre-built components.
Sometimes, you may wish to build your own custom image for a Versatile Express. Perhaps you wish to use a more recent snapshot of the "hardware pack":https://wiki.linaro.org/HardwarePacks for Ubuntu or take the latest Android build. Whatever the reason, you will want to use the "Linaro Image Tools":https://wiki.linaro.org/Linaro-Image-Tools to create a custom image.
Using components to generate the image will yield the same functionality found in the pre-built image of the same release.
h3. Prerequisites
* Ubuntu 12.04 64 bit or newer on your desktop PC, which you can download from "www.ubuntu.com":http://www.ubuntu.com
* Download Artifacts from above or use the following command in your terminal
bc. wget http://releases.linaro.org/12.10/android/vexpress/boot.tar.bz2
wget http://releases.linaro.org/12.10/android/vexpress/system.tar.bz2
wget http://releases.linaro.org/12.10/android/vexpress/userdata.tar.bz2
* Download "Linaro image tools":https://wiki.linaro.org/Linaro-Image-Tools which can be obtained in two ways:
** Method 1: Install them from the Linaro Image Tools "PPA":https://launchpad.net/~linaro-maintainers/+archive/tools
bc. sudo add-apt-repository ppa:linaro-maintainers/tools
sudo apt-get update
sudo apt-get install linaro-image-tools
** Method 2: Building from source
bc. wget http://releases.linaro.org/12.10/components/platform/linaro-image-tools/linaro-image-tools-2012.10.tar.gz
* Insert SD card and note the assigned @'/dev/sdX'@ or @'/dev/mmcblk0'@
bc. dmesg | less
Look for a line that looks like the following at the end of the log
@[288582.790722] sdc: sdc1 sdc2 sdc3 sdc4 <sdc5 sdc6 >@
Or, if your machine uses @'/dev/mmcblkX'@, you may see a line line this:
@[10770.938042] mmcblk0: p1 p2 p3 p4 < p5 p6 >@
*WARNING:* In the next step, make sure you use @/dev/"whatever you see above"@. *You can erase your hard drive* with the wrong parameter.
* Create media
bc. linaro-android-media-create --mmc /dev/sdX --dev vexpress --boot boot.tar.bz2 --system system.tar.bz2 --userdata userdata.tar.bz2
h2. Booting the image
** After the media create command has finished executing, remove the SD card from your PC and insert it into the Versatile Express board
** Ensure you have followed the instructions on the Firmware Update tab
** Reboot the board
*** When prompsed with “Cmd>" prompt, press the red reboot button
|
