1 files changed, 0 insertions, 69 deletions
diff --git a/android/images/armv8-juice-fvp-lsk/HOWTO_prebuilt.txt b/android/images/armv8-juice-fvp-lsk/HOWTO_prebuilt.txt
deleted file mode 100644
index f699a3e..0000000
--- a/android/images/armv8-juice-fvp-lsk/HOWTO_prebuilt.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-Instructions for https://android-build.linaro.org/builds/~linaro-android/<BUILD_NAME>/
-
-= Get artifacts =
-
-  Scroll down to the 'Downloads' section
-
-  Click on each link to download:
-    boot.tar.bz2
-    system.tar.bz2
-    userdata.tar.bz2
-
-= Get linaro image tools =
-
-  Run these commands to get all the dependencies for linaro-image-tools and the tip of linaro-image-tools
-
-  $ sudo add-apt-repository ppa:linaro-maintainers/tools
-  $ sudo apt-get update
-  $ sudo apt-get install linaro-image-tools
-
-  If you're using a released build (with a -release or from releases.linaro.org), skip this step.
-  If you're using a "tip" build do not skip the step and do the following:
-
-  $ sudo apt-get install bzr
-  $ bzr branch lp:linaro-image-tools
-
-= Create media (SD card) =
-
-  Disable automount (instructions provided for Gnome)
-
-  $ TMP1=$(dconf read /org/gnome/desktop/media-handling/automount)
-  $ TMP2=$(dconf read /org/gnome/desktop/media-handling/automount-open)
-  $ dconf write /org/gnome/desktop/media-handling/automount false
-  $ dconf write /org/gnome/desktop/media-handling/automount-open false
-
-  Insert an SD card
-
-  Run 'dmesg'
-
-  $ dmesg
-
-  Look for a line that looks like the following at the end of the log
-
-  [288582.790722]  sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >
-
-  WARNING: In the next step, make sure you use /dev/"whatever you see above".
-           You can erase your hard drive with the wrong parameter.
-
-  Run linaro image tools
-
-  $ linaro-android-media-create --mmc /dev/sdc --dev <BOARD> --boot boot.tar.bz2 --system system.tar.bz2 --userdata userdata.tar.bz2
-
-  If you're using tip of linaro image tools
-
-  $ ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdc --dev <BOARD> --boot boot.tar.bz2 --system system.tar.bz2 --userdata userdata.tar.bz2
-
-  To find <BOARD> run linaro-android-media-create with a -h and read the help.
-
-  Restore automount
-
-  $ dconf write /org/gnome/desktop/media-handling/automount $TMP1
-  $ dconf write /org/gnome/desktop/media-handling/automount-open $TMP2
-
-  Remove the SD card from the device writer and plug it into the board.
-
-= Check console output =
-
-  Plug in an USB-to-serial converter and run minicom
-
-  $ minicom -D /dev/ttyUSB0 -w -C minicom.txt