summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRyan Harkin <ryan.harkin@linaro.org>2012-11-22 12:19:39 +0000
committerRyan Harkin <ryan.harkin@linaro.org>2012-11-22 12:19:39 +0000
commitf304b3ba61047789a7d575ca69666f5ec86166e4 (patch)
tree9ded8301bfd888c1696517daa4bfc39e286fa518
parent54da99dc406a2d04379e203f5c0c6501dafe8537 (diff)
downloadtextile_instructions-12.10.tar.gz
Update Booting the image wording12.10
Updated the section at the bottom of the Install files showing users what to do next after feedback from ARM support. Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
-rw-r--r--HOWTO_install.txt7
-rw-r--r--INSTALL.textile7
2 files changed, 6 insertions, 8 deletions
diff --git a/HOWTO_install.txt b/HOWTO_install.txt
index 18c9871..dae7c96 100644
--- a/HOWTO_install.txt
+++ b/HOWTO_install.txt
@@ -78,8 +78,7 @@ bc. linaro-android-media-create --mmc /dev/sdX --dev vexpress --boot boot.tar.bz
h2. Booting the image
-** After the media create command has finished executing, remove the SD card from your PC and insert it into the Versatile Express board
-** Ensure you have followed the instructions on the Firmware Update tab
-** Reboot the board
-*** When prompsed with “Cmd>" prompt, press the red reboot button
+After the media create tool has finished executing, remove the SD card from your PC and insert it into the Versatile Express board.
+
+Before you can boot the image you will need to install the UEFI boot loader into NOR flash and update the Versatile MMC card configuration files. The instructions on the Firmware Update tab provide information on how to do this and how to configure UEFI to specify the SD card as a boot device.
diff --git a/INSTALL.textile b/INSTALL.textile
index 9b98665..44bdca2 100644
--- a/INSTALL.textile
+++ b/INSTALL.textile
@@ -96,8 +96,7 @@ After copying, safely unmount the SD card.
h2. Booting the image
-** After the media create tool has finished executing, remove the SD card from your PC and insert it into the Versatile Express board
-** Ensure you have followed the instructions on the Firmware Update tab
-** Reboot the board
-*** When prompsed with “Cmd>" prompt, press the red reboot button
+After the media create tool has finished executing, remove the SD card from your PC and insert it into the Versatile Express board.
+
+Before you can boot the image you will need to install the UEFI boot loader into NOR flash and update the Versatile MMC card configuration files. The instructions on the Firmware Update tab provide information on how to do this and how to configure UEFI to specify the SD card as a boot device.