1 files changed, 4 insertions, 4 deletions
diff --git a/members/arm/openembedded/juno-lsk/GETTINGSTARTED.textile b/members/arm/openembedded/juno-lsk/GETTINGSTARTED.textile
index aa35ab5..2e5317f 100644
--- a/members/arm/openembedded/juno-lsk/GETTINGSTARTED.textile
+++ b/members/arm/openembedded/juno-lsk/GETTINGSTARTED.textile
@@ -1,6 +1,6 @@
 h2. License
 
-The use of Juno software is subject to the terms of the Juno "End User License Agreement":https://releases.linaro.org/14.09/members/arm/openembedded/juno-lsk/#tabs-5.
+The use of Juno software is subject to the terms of the Juno "End User License Agreement":https://releases.linaro.org/14.10/members/arm/openembedded/juno-lsk/#tabs-5.
 
 h2. Juno ports
 
@@ -68,9 +68,9 @@ h3. Software preloaded on new Juno boards
 
 New Juno boards arrive preloaded with MCC firmware, SCP firmware, AP trusted firmware, UEFI, and a Linux kernel. The Juno board does not contain a Linux filesystem or Android AOSP filesystem anywhere in onboard storage.
 
-*Please note* that early batches of Juno boards contained an SCP firmware image that limits the CPU clock to 50 MHz. ARM strongly recommends that you immediately upgrade to the latest firmware image hosted on this website by following the instructions in the section titled "Firmware update" on the "Binary Image Installation tab":https://releases.linaro.org/14.09/members/arm/openembedded/juno-lsk/#tabs-2.
+*Please note* that early batches of Juno boards contained an SCP firmware image that limits the CPU clock to 50 MHz. ARM strongly recommends that you immediately upgrade to the latest firmware image hosted on this website by following the instructions in the section titled "Firmware update" on the "Binary Image Installation tab":https://releases.linaro.org/14.10/members/arm/openembedded/juno-lsk/#tabs-2.
 
-When the power is first turned on, it should boot straight through to Linux. UEFI offers a 10 second window during which you can interrupt the boot sequence by pressing a key on the serial terminal, otherwise the Linux kernel will be launched. In order to reach the Linux shell you must attach a Linux "filesystem":https://releases.linaro.org/14.09/members/arm/openembedded/juno-lsk/#tabs-2 via USB. If no filesystem is attached then Linux will boot as far as it can and then announce that it is waiting for a filesystem to be attached.
+When the power is first turned on, it should boot straight through to Linux. UEFI offers a 10 second window during which you can interrupt the boot sequence by pressing a key on the serial terminal, otherwise the Linux kernel will be launched. In order to reach the Linux shell you must attach a Linux "filesystem":https://releases.linaro.org/14.10/members/arm/openembedded/juno-lsk/#tabs-2 via USB. If no filesystem is attached then Linux will boot as far as it can and then announce that it is waiting for a filesystem to be attached.
 
 New Juno boards do not contain any Android software pre-installed.
 
@@ -87,7 +87,7 @@ The steps to set up and boot the board are:
 
 h3. Getting Juno to boot to the Linux shell
 
-If you have just received a new board and powered it on for the first time, you will not reach the Linux shell. Juno will boot Linux to the point where it looks for a filesystem, and when it can't find one it will sit and wait for one to be attached. To boot all the way to the Linux shell you will need to "attach a root filesystem":https://releases.linaro.org/14.09/members/arm/openembedded/juno-lsk/#tabs-2.
+If you have just received a new board and powered it on for the first time, you will not reach the Linux shell. Juno will boot Linux to the point where it looks for a filesystem, and when it can't find one it will sit and wait for one to be attached. To boot all the way to the Linux shell you will need to "attach a root filesystem":https://releases.linaro.org/14.10/members/arm/openembedded/juno-lsk/#tabs-2.
 
 h3. Setting the Real Time Clock (required for Android)