14.09: bug scrub from ARM

Change-Id: Ie8e19f53aab25e98608440bd4b0eb8aa82a5a32b
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>

3 files changed, 0 insertions, 9 deletions

diff --git a/members/arm/android/images/armv8-android-juno-lsk/HOWTO_releasenotes.txt b/members/arm/android/images/armv8-android-juno-lsk/HOWTO_releasenotes.txt
index 4ef80d2..290b416 100644
--- a/members/arm/android/images/armv8-android-juno-lsk/HOWTO_releasenotes.txt
+++ b/members/arm/android/images/armv8-android-juno-lsk/HOWTO_releasenotes.txt
@@ -238,11 +238,8 @@ The following known issues are present in this release.  Please contact "support
 |"Bug 23":https://bugs.linaro.org/show_bug.cgi?id=23 | backtrace_test reports failures on 64/64 build | Failures reported with local trace and threads |
 |"Bug 12":https://bugs.linaro.org/show_bug.cgi?id=12 | Intermittent HDMI failures |There is a problem with HDMI sync for monitors that don't support FullHD resolution. The board works with some monitors and doesn’t work with others. The monitors known to work are: ASUS VS247 H-P, Samsung S22A300H, HP LP2475w |
 |"Bug 23":https://bugs.linaro.org/show_bug.cgi?id=23 |backtrace_test reports failures on 64/64 build |There are failures in libbacktrace unit tests. They only happen on 64bit root filesystem |
-|ARM JSW-749 Linux [Juno-Beta-rc3] | Performance is degraded with idle enabled | With cpuidle enabled  android 64 bit fs shows performance degradation |
 |ARM JSW-748 Linux [Juno-Beta-rc1] | Periodic black screen flash | Screen blanking is seen at a regular frequency of one in 10 sec |
-|ARM JSW-746 | USB Drive failure at maximum OPP | With the overdrive operating point enabled, some USB hard drives don't work (causes kernel panic) |
 |ARM JSW-743 | HDMI monitor incompatibilities | HDMI video out fails to display Android home screen on one out of 4 monitor types tried |
 |ARM JSW-742 | No HDMI  | HDMI video out does not work on both the ports |
 |ARM JSW-741 |UEFI - missing boot options | UEFI bootmanager fails to list TFTP and PXE boot options if a live network cable not connected  |
-|ARM JSW-727 |'Trace' does not work in UEFI | While configuring DS-5 to trace UEFI execution, an error was returned when connecting DS-5 to the debugger |
 |ARM JSW-711 |Reset failure | Reset fails if button is pressed during NOR flash write|
diff --git a/members/arm/android/images/armv8-juice-juno-lsk/HOWTO_releasenotes.txt b/members/arm/android/images/armv8-juice-juno-lsk/HOWTO_releasenotes.txt
index 2eff07a..616ddbe 100644
--- a/members/arm/android/images/armv8-juice-juno-lsk/HOWTO_releasenotes.txt
+++ b/members/arm/android/images/armv8-juice-juno-lsk/HOWTO_releasenotes.txt
@@ -137,11 +137,8 @@ The following known issues are present in this release.  Please contact "support
 |"Bug 135":https://bugs.linaro.org/show_bug.cgi?id=135 |Juno: Android fails to boot when board has a date in the future |When the board default date is set beyond 19.01.2038 Android fails to boot. This is most likely a bug in generic Android code. As a workaround, the date on the board needs to be set to something before 2038 cut off date. |
 |"Bug 271":https://bugs.linaro.org/show_bug.cgi?id=271 | juice_evtest.sh reports errors | Suspend/Resume does not seem to work through EVDEV in this SW release |
 |"Bug 12":https://bugs.linaro.org/show_bug.cgi?id=12 | Intermittent HDMI failures |There is a problem with HDMI sync.for monitors that don't support FullHD resolution. The board works with some monitors and doesn't work with others. The monitors known to work are: ASUS VS247 H-P, Samsung S22A300H, HP LP2475w |
-|ARM JSW-749 Linux [Juno-Beta-rc3] | Performance is degraded with idle enabled | With cpuidle enabled  android 64 bit fs shows performance degradation |
 |ARM JSW-748 Linux [Juno-Beta-rc1] | Periodic black screen flash | Screen blanking is seen at a regular frequency of one in 10 sec |
-|ARM JSW-746 | USB Drive failure at maximum OPP | With the overdrive operating point enabled, some USB hard drives don't work (causes kernel panic) |
 |ARM JSW-743 | HDMI monitor incompatibilities | HDMI video out fails to display Android home screen on one out of 4 monitor types tried |
 |ARM JSW-742 | No HDMI  | HDMI video out does not work on both the ports |
 |ARM JSW-741 |UEFI - missing boot options | UEFI bootmanager fails to list TFTP and PXE boot options if a live network cable not connected  |
-|ARM JSW-727 |'Trace' does not work in UEFI | While configuring DS-5 to trace UEFI execution, an error was returned when connecting DS-5 to the debugger |
 |ARM JSW-711 |Reset failure | Reset fails if button is pressed during NOR flash write |
diff --git a/members/arm/openembedded/juno-lsk/README.textile b/members/arm/openembedded/juno-lsk/README.textile
index 304df49..9d27b68 100644
--- a/members/arm/openembedded/juno-lsk/README.textile
+++ b/members/arm/openembedded/juno-lsk/README.textile
@@ -92,9 +92,6 @@ The following known issues are present in this release.  Please contact "support
 |"Bug 136":https://bugs.linaro.org/show_bug.cgi?id=136 |2nd USB Mass storage device fails |When attempting to use a second USB storage device on Juno, both sda and sdb will go r/o and then fail to read from the device.  |
 |"Bug 137":https://bugs.linaro.org/show_bug.cgi?id=137 |nfs v4 hangs when creating symlinks |nfs v4 hangs when creating symlinks |
 |"Bug 48":https://bugs.linaro.org/show_bug.cgi?id=48 |password authentication over SSH doesn't work |<i>please see public bug for details</i> |
-|ARM JSW-749 Linux [Juno-Beta-rc3] | Performance is degraded with idle enabled | With cpuidle enabled  android 64 bit fs shows performance degradation |
-|ARM JSW-746 | USB Drive failure at maximum OPP | With the overdrive operating point enabled, some USB hard drives don't work (causes kernel panic) |
-|ARM JSW-727 |'Trace' does not work in UEFI | While configuring DS-5 to trace UEFI execution, an error was returned when connecting DS-5 to the debugger |
 |ARM JSW-711 |Reset failure | Reset fails if button is pressed during NOR flash write|
 |"LP:1212126":https://bugs.launchpad.net/linaro-oe/+bug/1212126 |perf self test does not execute on Linaro openembedded lamp image |<i>please see public bug for details</i> |
 |"LP:1212115":https://bugs.launchpad.net/linaro-oe/+bug/1212115i |phpmysql test fail on Linaro openembedded Lamp image on Lava |<i>please see public bug for details</i> |