14.10: update OE vexpress binary filenames

Change-Id: Id5d5c9fd7aa5ed6a64e52681791bc1285a4c8c50
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>

2 files changed, 8 insertions, 8 deletions

diff --git a/members/arm/openembedded/vexpress-lsk/FASTMODELS.textile b/members/arm/openembedded/vexpress-lsk/FASTMODELS.textile
index 11edf73..d0a0bb4 100644
--- a/members/arm/openembedded/vexpress-lsk/FASTMODELS.textile
+++ b/members/arm/openembedded/vexpress-lsk/FASTMODELS.textile
@@ -30,12 +30,12 @@ Fast Models will only deal with file systems up to 2GB in size, however the pre-
 
 Using the following command, you will download the RootFS, the hardware pack.
 
-bc. wget https://releases.linaro.org/14.10/members/arm/openembedded/vexpress-lsk/hwpack_linaro-lsk-vexpress_20140923-688_armhf_supported.tar.gz
-wget https://releases.linaro.org/14.10/members/arm/openembedded/vexpress-lsk/linaro-image-alip-genericarmv7a-20140924-296.rootfs.tar.gz
+bc. wget https://releases.linaro.org/14.10/members/arm/openembedded/vexpress-lsk/hwpack_linaro-lsk-vexpress_20141023-693_armhf_supported.tar.gz
+wget https://releases.linaro.org/14.10/members/arm/openembedded/vexpress-lsk/linaro-image-alip-genericarmv7a-20141023-299.rootfs.tar.gz
 
 Now you need to create the image using the following commands.
 
-bc. linaro-media-create --image-file linaro.img --image-size 2000M --dev vexpress --hwpack hwpack_linaro-lsk-vexpress_20140923-688_armhf_supported.tar.gz --binary linaro-image-alip-genericarmv7a-20140924-296.rootfs.tar.gz
+bc. linaro-media-create --image-file linaro.img --image-size 2000M --dev vexpress --hwpack hwpack_linaro-lsk-vexpress_20141023-693_armhf_supported.tar.gz --binary linaro-image-alip-genericarmv7a-20141023-299.rootfs.tar.gz
 
 bc. sudo kpartx -a linaro.img
 mkdir boot
diff --git a/members/arm/openembedded/vexpress-lsk/INSTALL.textile b/members/arm/openembedded/vexpress-lsk/INSTALL.textile
index a05d00c..308ed4d 100644
--- a/members/arm/openembedded/vexpress-lsk/INSTALL.textile
+++ b/members/arm/openembedded/vexpress-lsk/INSTALL.textile
@@ -18,7 +18,7 @@ h3. Prerequisites
 * Latest firmware installed onto the Versatile Express. Please see "Firmware Update" tab
 * Download the pre-built image for this release
 
-bc. wget https://releases.linaro.org/14.10/members/arm/openembedded/vexpress-lsk/lsk-vexpress-openembedded_alip-armv7a-gcc-4.8_20140923-688.img.gz
+bc. wget https://releases.linaro.org/14.10/members/arm/openembedded/vexpress-lsk/lsk-vexpress-openembedded_alip-armv7a-gcc-4.8_20141023-693.img.gz
 
 h3. Installation Steps
 
@@ -27,7 +27,7 @@ h3. Installation Steps
 
 bc. dmesg
 SDCARD=/dev/sdX # sdcard found from dmesg above
-zcat https://releases.linaro.org/14.10/members/arm/openembedded/vexpress-lsk/lsk-vexpress-openembedded_alip-armv7a-gcc-4.8_20140923-688.img.gz | sudo dd bs=64k of=$SDCARD
+zcat https://releases.linaro.org/14.10/members/arm/openembedded/vexpress-lsk/lsk-vexpress-openembedded_alip-armv7a-gcc-4.8_20141023-693.img.gz | sudo dd bs=64k of=$SDCARD
 
 When the image is created, skip down to the section "Booting the image".
 
@@ -46,8 +46,8 @@ h3. Prerequisites
 * Ubuntu 12.04 64 bit or newer on your desktop PC ("www.ubuntu.com":http://www.ubuntu.com)
 * Download Artifacts from above or use the following command in your terminal
 
-bc. wget https://releases.linaro.org/14.10/members/arm/openembedded/vexpress-lsk/hwpack_linaro-lsk-vexpress_20140923-688_armhf_supported.tar.gz
-wget https://releases.linaro.org/14.10/members/arm/openembedded/vexpress-lsk/linaro-image-alip-genericarmv7a-20140924-296.rootfs.tar.gz
+bc. wget https://releases.linaro.org/14.10/members/arm/openembedded/vexpress-lsk/hwpack_linaro-lsk-vexpress_20141023-693_armhf_supported.tar.gz
+wget https://releases.linaro.org/14.10/members/arm/openembedded/vexpress-lsk/linaro-image-alip-genericarmv7a-20141023-299.rootfs.tar.gz
 
 * Get "Linaro image tools":https://wiki.linaro.org/Linaro-Image-Tools. There are multiple ways you can get the latest Linaro Image Tools:
 
@@ -77,7 +77,7 @@ Or, if your machine uses '/dev/mmcblkX', you may see a line line this:
 
 * Create media
 
-bc. sudo linaro-media-create --mmc /dev/sdX --dev vexpress --hwpack hwpack_linaro-lsk-vexpress_20140923-688_armhf_supported.tar.gz --binary linaro-image-alip-genericarmv7a-20140924-296.rootfs.tar.gz
+bc. sudo linaro-media-create --mmc /dev/sdX --dev vexpress --hwpack hwpack_linaro-lsk-vexpress_20141023-693_armhf_supported.tar.gz --binary linaro-image-alip-genericarmv7a-20141023-299.rootfs.tar.gz
 
 h2. Booting the image