h2. License

The use of Juno software is subject to the terms of the Juno "End User License Agreement":https://releases.linaro.org/latest/android/images/armv8-juice-juno-lsk/#tabs-5.

h2. Installation

h3. Pre-Installation Steps

* Ubuntu 12.04 64 bit or newer on your desktop PC ("www.ubuntu.com":http://www.ubuntu.com)
* Before any installation begins, it is important that you ensure your board has the latest firmware installed
** See the Juno Firmware wiki for more details:
** "https://wiki.linaro.org/ARM/Juno/Firmware":https://wiki.linaro.org/ARM/Juno/Firmware
* 4GB USB drive or larger
* Choose either to use a pre-built image or to build a custom image by following the steps below

h3. Using pre-built image

* Uncompress the downloaded pre-built image (juno.img.bz2) and write it to a USB drive
* Safely remove the USB drive and insert it into the board

h3. Building a custom image using pre-built components

* Download Artifacts from above
* Get "Linaro image tools":https://wiki.linaro.org/Linaro-Image-Tools
* Create media

bc. linaro-android-media-create --mmc /dev/sdX --dev vexpress --boot boot.tar.bz2 --system system.tar.bz2 --userdata userdata.tar.bz2

h3. Post-installation steps

* Safely remove the USB drive and insert it into the board
* "Configure UEFI":https://wiki.linaro.org/ARM/UEFI#Configuring_UEFI_to_boot_Android_on_Juno