diff options
Diffstat (limited to 'android/images/armv8-android-juno-lsk/HOWTO_gettingstarted.txt')
| -rw-r--r-- | android/images/armv8-android-juno-lsk/HOWTO_gettingstarted.txt | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/android/images/armv8-android-juno-lsk/HOWTO_gettingstarted.txt b/android/images/armv8-android-juno-lsk/HOWTO_gettingstarted.txt index a77dc72..ce97eb5 100644 --- a/android/images/armv8-android-juno-lsk/HOWTO_gettingstarted.txt +++ b/android/images/armv8-android-juno-lsk/HOWTO_gettingstarted.txt @@ -19,8 +19,8 @@ h3(#uarts). UARTs There are 4 UARTs on the Juno board: | *UART* | *Location* | *Used by* | *Baud* | *Data bits* | *Stop bits* | *Parity | -|SoC UART0 |"back panel":https://releases.linaro.org/14.06/openembedded/juno-lsk/RearPanel.png |The motherboard, UEFI and the Linux kernel. |115200 |8 |1 |None | -|SoC UART1 |"back panel":https://releases.linaro.org/14.06/openembedded/juno-lsk/RearPanel.png |SCP firmware |115200 |8 |1 |None | +|SoC UART0 |"back panel":https://releases.linaro.org/14.06/android/images/armv8-android-juno-lsk/RearPanel.png |The motherboard, UEFI and the Linux kernel. |115200 |8 |1 |None | +|SoC UART1 |"back panel":https://releases.linaro.org/14.06/android/images/armv8-android-juno-lsk/RearPanel.png |SCP firmware |115200 |8 |1 |None | |FPGA UART0 |Corresponds to the J55 header on the board. Please contact ARM for more information about this type of header. |AP Trusted Firmware |115200 |8 |1 |None | |FPGA UART1 |Corresponds to the J56 header on the board. Please contact ARM for more information about this type of header |Unused at the moment |- |- |- |- | @@ -91,7 +91,7 @@ If you have just received a new board and powered it on for the first time, you h3. Setting the Real Time Clock (required for Android) -New Juno boards do not have the correct time programmed into the real time clock. Some software (notably Android) will not operate correctly until a sensible time is programmed. To set the time, start a terminal session with "UART0":https://releases.linaro.org/14.06/openembedded/juno-lsk/RearPanel.png connector ("settings":#uarts). Ensure there is power to the board, but the SoC must be powered off (if it is not, then press the black "Hardware Reset" button). +New Juno boards do not have the correct time programmed into the real time clock. Some software (notably Android) will not operate correctly until a sensible time is programmed. To set the time, start a terminal session with "UART0":https://releases.linaro.org/14.06/android/images/armv8-android-juno-lsk/RearPanel.png connector ("settings":#uarts). Ensure there is power to the board, but the SoC must be powered off (if it is not, then press the black "Hardware Reset" button). Execute the following: |