diff options
6 files changed, 9 insertions, 9 deletions
diff --git a/android/images/armv8-android-juno-lsk/HOWTO_getsourceandbuild.txt b/android/images/armv8-android-juno-lsk/HOWTO_getsourceandbuild.txt index 26ae1a2..21cf30b 100644 --- a/android/images/armv8-android-juno-lsk/HOWTO_getsourceandbuild.txt +++ b/android/images/armv8-android-juno-lsk/HOWTO_getsourceandbuild.txt @@ -224,7 +224,7 @@ $ make fiptool bc. $ export PATH=$JUNO_ROOT_DIR/arm-trusted-firmware/tools/fip_create:$PATH -3. Download the "firmware image artefacts":https://wiki.linaro.org/ARM/VersatileExpress?action=AttachFile&do=get&target=juno-firmware-beta-0.7.5.zip and extract to a working directory (hereafter referred to as "<path to prebuilt binary>"). +3. Download the "firmware image artefacts":https://wiki.linaro.org/ARM/Juno?action=AttachFile&do=get&target=juno-firmware-beta-0.7.5.zip and extract to a working directory (hereafter referred to as @"<path to prebuilt binary>"@). 4. Gather the binary files (the following example is for release builds only). diff --git a/android/images/armv8-android-juno-lsk/HOWTO_install.txt b/android/images/armv8-android-juno-lsk/HOWTO_install.txt index 7c3f779..bf4ae07 100644 --- a/android/images/armv8-android-juno-lsk/HOWTO_install.txt +++ b/android/images/armv8-android-juno-lsk/HOWTO_install.txt @@ -140,7 +140,7 @@ h3. Example UEFI Configuration When booting your system, after a short time, you be presented by a boot countdown from 10, thus: -bc.The default boot selection will start in 8 seconds +bc. The default boot selection will start in 10 seconds When you see this prompt, please press the enter key to interrupt the countdown. You will then be presented with a menu, thus: @@ -229,7 +229,7 @@ After this you will be asked to supply the arguments required to boot the kernel bc. Arguments to pass to the binary: -Please note, cope and paste does not work well over the serial terminal. The user is adviced to type the commandline arguments by hand, character at a time, followed by the enter key. The commandline used is shown below: +Please note, copy and paste does not work well over the serial terminal. The user is advised to type the commandline arguments by hand, character at a time, followed by the enter key. The commandline used is shown below: bc. console=ttyAMA0,115200 earlyprintk=pl011,0x7ff80000 root=/dev/ram0 verbose debug diff --git a/android/images/armv8-juice-juno-lsk/HOWTO_getsourceandbuild.txt b/android/images/armv8-juice-juno-lsk/HOWTO_getsourceandbuild.txt index cfb4b53..b7ab740 100644 --- a/android/images/armv8-juice-juno-lsk/HOWTO_getsourceandbuild.txt +++ b/android/images/armv8-juice-juno-lsk/HOWTO_getsourceandbuild.txt @@ -224,7 +224,7 @@ $ make fiptool bc. $ export PATH=$JUNO_ROOT_DIR/arm-trusted-firmware/tools/fip_create:$PATH -3. Download the "firmware image artefacts":https://wiki.linaro.org/ARM/VersatileExpress?action=AttachFile&do=get&target=juno-firmware-beta-0.7.5.zip and extract to a working directory (hereafter referred to as "<path to prebuilt binary>"). +3. Download the "firmware image artefacts":https://wiki.linaro.org/ARM/Juno?action=AttachFile&do=get&target=juno-firmware-beta-0.7.5.zip and extract to a working directory (hereafter referred to as @"<path to prebuilt binary>"@). 4. Gather the binary files (the following example is for release builds only). diff --git a/android/images/armv8-juice-juno-lsk/HOWTO_install.txt b/android/images/armv8-juice-juno-lsk/HOWTO_install.txt index f4f1060..474fef9 100644 --- a/android/images/armv8-juice-juno-lsk/HOWTO_install.txt +++ b/android/images/armv8-juice-juno-lsk/HOWTO_install.txt @@ -140,7 +140,7 @@ h3. Example UEFI Configuration When booting your system, after a short time, you be presented by a boot countdown from 10, thus: -bc.The default boot selection will start in 8 seconds +bc. The default boot selection will start in 10 seconds When you see this prompt, please press the enter key to interrupt the countdown. You will then be presented with a menu, thus: @@ -229,7 +229,7 @@ After this you will be asked to supply the arguments required to boot the kernel bc. Arguments to pass to the binary: -Please note, cope and paste does not work well over the serial terminal. The user is adviced to type the commandline arguments by hand, character at a time, followed by the enter key. The commandline used is shown below: +Please note, copy and paste does not work well over the serial terminal. The user is advised to type the commandline arguments by hand, character at a time, followed by the enter key. The commandline used is shown below: bc. console=ttyAMA0,115200 earlyprintk=pl011,0x7ff80000 root=/dev/ram0 verbose debug diff --git a/openembedded/juno-lsk/HACKING.textile b/openembedded/juno-lsk/HACKING.textile index 5b7012e..de3c74b 100644 --- a/openembedded/juno-lsk/HACKING.textile +++ b/openembedded/juno-lsk/HACKING.textile @@ -213,7 +213,7 @@ $ make fiptool bc. $ export PATH=$JUNO_ROOT_DIR/arm-trusted-firmware/tools/fip_create:$PATH -3. Download the "firmware image artefacts":https://wiki.linaro.org/ARM/VersatileExpress?action=AttachFile&do=get&target=juno-firmware-beta-0.7.5.zip and extract to a working directory (hereafter referred to as "<path to prebuilt binary>"). +3. Download the "firmware image artefacts":https://wiki.linaro.org/ARM/Juno?action=AttachFile&do=get&target=juno-firmware-beta-0.7.5.zip and extract to a working directory (hereafter referred to as @"<path to prebuilt binary>"@). 4. Gather the binary files (the following example is for release builds only). diff --git a/openembedded/juno-lsk/INSTALL.textile b/openembedded/juno-lsk/INSTALL.textile index 40fd7c9..64b3596 100644 --- a/openembedded/juno-lsk/INSTALL.textile +++ b/openembedded/juno-lsk/INSTALL.textile @@ -145,7 +145,7 @@ h3. Example UEFI Configuration When booting your system, after a short time, you be presented by a boot countdown from 10, thus: -bc.The default boot selection will start in 8 seconds +bc. The default boot selection will start in 10 seconds When you see this prompt, please press the enter key to interrupt the countdown. You will then be presented with a menu, thus: @@ -229,7 +229,7 @@ After this you will be asked to supply the arguments required to boot the kernel bc. Arguments to pass to the binary: -Please note, cope and paste does not work well over the serial terminal. The user is adviced to type the commandline arguments by hand, character at a time, followed by the enter key. The commandline used is shown below: +Please note, copy and paste does not work well over the serial terminal. The user is advised to type the commandline arguments by hand, character at a time, followed by the enter key. The commandline used is shown below: bc. console=ttyAMA0,115200 rootwait root=/dev/sda2 |