14.07: update Configure UEFI links and text

Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>

6 files changed, 6 insertions, 6 deletions

diff --git a/android/images/armv8-android-juno-lsk/HOWTO_install.txt b/android/images/armv8-android-juno-lsk/HOWTO_install.txt
index 7b47ca1..c05bfb1 100644
--- a/android/images/armv8-android-juno-lsk/HOWTO_install.txt
+++ b/android/images/armv8-android-juno-lsk/HOWTO_install.txt
@@ -29,7 +29,7 @@ bc. linaro-android-media-create --mmc /dev/sdX --dev vexpress --boot boot.tar.bz
 h3. Post-installation steps
 
 * Safely remove the USB drive and insert it into the board
-* "Configure UEFI":https://wiki.linaro.org/ARM/UEFI for your new USB drive
+* "Configure UEFI":https://wiki.linaro.org/ARM/UEFI#Configuring_UEFI_to_boot_Android_on_Juno
  
 
 
diff --git a/android/images/armv8-juice-juno-lsk/HOWTO_install.txt b/android/images/armv8-juice-juno-lsk/HOWTO_install.txt
index 6c4090f..907ce33 100644
--- a/android/images/armv8-juice-juno-lsk/HOWTO_install.txt
+++ b/android/images/armv8-juice-juno-lsk/HOWTO_install.txt
@@ -29,7 +29,7 @@ bc. linaro-android-media-create --mmc /dev/sdX --dev vexpress --boot boot.tar.bz
 h3. Post-installation steps
 
 * Safely remove the USB drive and insert it into the board
-* "Configure UEFI":https://wiki.linaro.org/ARM/UEFI for your new USB drive
+* "Configure UEFI":https://wiki.linaro.org/ARM/UEFI#Configuring_UEFI_to_boot_Android_on_Juno
  
 
 
diff --git a/android/vexpress-lsk/HOWTO_getsourceandbuild.txt b/android/vexpress-lsk/HOWTO_getsourceandbuild.txt
index dfcb82f..856366b 100644
--- a/android/vexpress-lsk/HOWTO_getsourceandbuild.txt
+++ b/android/vexpress-lsk/HOWTO_getsourceandbuild.txt
@@ -58,7 +58,7 @@ sudo linaro-android-media-create --mmc /dev/sdX --dev vexpress --boot boot.tar.b
 
 * Insert the SD card into your Versatile Express board and reboot it
 
-p. If UEFI is already configured to boot a Linaro Android image, it will boot from the SD card. If not, follow the instructions in the section: "Configure UEFI":https://wiki.linaro.org/ARM/UEFI#Configure_UEFI found on the Linaro wiki.
+p. If UEFI is already configured to boot a Linaro Android image, it will boot from the SD card. If not, follow the instructions in the section: "Configure UEFI":https://wiki.linaro.org/ARM/UEFI#Configuring_UEFI_to_boot_Android_on_Juno found on the Linaro wiki.
 
 h2. Compiling and installing your Kernel
 
diff --git a/android/vexpress/HOWTO_getsourceandbuild.txt b/android/vexpress/HOWTO_getsourceandbuild.txt
index d730a58..bacbde3 100644
--- a/android/vexpress/HOWTO_getsourceandbuild.txt
+++ b/android/vexpress/HOWTO_getsourceandbuild.txt
@@ -58,7 +58,7 @@ sudo linaro-android-media-create --mmc /dev/sdX --dev vexpress --boot boot.tar.b
 
 * Insert the SD card into your Versatile Express board and reboot it
 
-p. If UEFI is already configured to boot a Linaro Android image, it will boot from the SD card. If not, follow the instructions in the section: "Configure UEFI":https://wiki.linaro.org/ARM/UEFI#Configure_UEFI found on the Linaro wiki.
+p. If UEFI is already configured to boot a Linaro Android image, it will boot from the SD card. If not, follow the instructions in the section: "Configure UEFI":https://wiki.linaro.org/ARM/UEFI#Configuring_UEFI_to_boot_Android_on_Juno found on the Linaro wiki.
 
 h2. Compiling and installing your Kernel
 
diff --git a/openembedded/juno-lsk/INSTALL.textile b/openembedded/juno-lsk/INSTALL.textile
index a3a4526..5925a81 100644
--- a/openembedded/juno-lsk/INSTALL.textile
+++ b/openembedded/juno-lsk/INSTALL.textile
@@ -30,4 +30,4 @@ bc. sudo linaro-media-create --mmc /dev/sdX --dev juno --hwpack <hwpack filename
 h3. Post-installation steps
 
 * Safely remove the USB drive and insert it into the board
-* "Configure UEFI":https://wiki.linaro.org/ARM/UEFI for your new USB drive
+* "Configure UEFI":https://wiki.linaro.org/ARM/UEFI#Configuring_UEFI_to_boot_OpenEmbedded_on_Juno
diff --git a/openembedded/vexpress-lsk/INSTALL.textile b/openembedded/vexpress-lsk/INSTALL.textile
index 36bd0e1..86dbddb 100644
--- a/openembedded/vexpress-lsk/INSTALL.textile
+++ b/openembedded/vexpress-lsk/INSTALL.textile
@@ -30,4 +30,4 @@ bc. sudo linaro-media-create --mmc /dev/sdX --dev vexpress --hwpack <hwpack file
 h3. Post-installation steps
 
 * Safely remove the USB drive and insert it into the board
-* "Configure UEFI":https://wiki.linaro.org/ARM/UEFI for your new USB drive
+* "Configure UEFI":https://wiki.linaro.org/ARM/UEFI#Configuring_UEFI_for_Versatile_Express